![]() |
| piping at the waistline of my Aurora Dress |
![]() |
| Piping at the waistline of my 1950's Red Spot Dress |
Gail asked if I had done a tutorial on this, right before I was about to put piping at the waistline of my red tartan dress - so here goes!
You can buy piping ready-made, but it is usually fairly cheap polyester/cotton or polyester satin stuff:
or you can buy piping cord and cover it yourself:
or do what I did - stash bust and take the cord out of some old piping you no longer want!
Next you need to cut bias strips to cover your piping cord. I'm using self-fabric, and have marked a line 45degrees to the selvedge. You will need a strip about 3cm wide and slightly longer than your waistline - I just plonk my ruler in place and chalk around that because it is quick and easy:
I cut this out, then remembered I was using a checked fabric, lol! I recut the strip at the same angle as the line in the left corner, so that it passes through the same part of the check pattern along it's length (most checks aren't actually squares, but are rectangular, so you need to cut slightly off the true bias to get this effect).
To sew up your piping you'll need a zip foot on your machine:
Wrap the fabric around the cord, right side facing out, and stitch as close as you can to the piping cord:
Voila - pretty piping!
Because I'm an accuracy nerd, I don't sew the piping into the waistline willy-nilly, but measure it against my pattern for an accurate measurement. Chalk the piping at the CB, darts, seams and CF, remembering to skip the dart intake and seam allowances:
Now you can sew your piping to the bodice. Stitch along the same path as the piping stitching, and match those chalk marks to the relevant seams:
Have a wee moment of admiration:
Then sew the bodice to the skirt - stitch with the bodice on top, so you can sew in the line of the previous stitching:
I usually overlock the seam allowance and turn it upwards. Sometimes I add ribbon to it, like in the Red Spot Dress above, but this dress is having lining so that would be a waste of time!
Nice eh? I'm so glad I recut the binding, it was worthwhile to get it all symmetrical like this. When it comes to checks, I am definitely a matchy-matchy person! (by the way, I'm still working on my check-matching post - it keeps getting bigger.....)
There are so many fun things you can do with piping - edging collars and cuffs, accenting style lines, etc - and I think covering your own always looks classy. It could be self fabric, a contrast colour, or a texture contrast like satin. Whatever you choose, piping is simple and effective. Are you a piping fan too?













I love the way piping helps "crisp up" the design details of a garment. But, I've never tried to add any. Your tutorial makes me think I could give it a go sometime. Thanks for all the great pictures!
ReplyDeleteI totally agree that piping add a level a quality to garments. It's a detail that says, I care for this garment, I spent time on this garment.
ReplyDeletethanks so much for this post! I love the look of piping, and am definitely going to try to make my own!
ReplyDeleteI love piping. It totally makes sense to mark the piping to sew it in accurately.
ReplyDeleteThanks for your tute. There's always lots of piping methods to learn and use for that beautiful finish.
ReplyDeleteI love piping too, and this is a great tutorial. I think I am ready to try it now. thanks
ReplyDeleteGreat idea! It makes a very fine finishing. (sorry my english...)
ReplyDeleteThank you for this tutorial...this is a design element I will surely use.
ReplyDeleteThanks for this tutorial. I have made so much self-made piping for all the slipcovers I've sewn over the years, but inserting into a garment must be much more careful so I'm glad for your tips.
ReplyDeletethanks I would never have thought about creating pattern matching marks and measureing against pattern. looks great.
ReplyDeleteI've been thinking about trying my own piping to add it to the outside of patch pockets, so thanks a lot for your tutorial! I think piping adds a little interest without it being *too much*
ReplyDeleteI love piping too! :) Thank you for the tutorial, it looks so simple. I made my own piping once before, but I seem to recall using cord that had fusible attached, so it ironed on to the cover fabric. But the result was not nearly as nice. Thanks for sharing! I can't wait to add piping to a waist line now.
ReplyDeletemuito obrigado por colocar este post , estava atras , para saber como se faz, agora ja posso colocar no casaco que estou fazendo , aqui no Brasil o outono esta com cara de inverno, muito obrigado ..beijinho
ReplyDeleteJubi
Gosh that plaid is so pretty. I'm still admiring it ;). I should really try piping again and this looks so good. My one and only experience with quilting involved putting some piping around the perimeter and I used a piping foot from my old Bernina. I can't remember why I needed one because this looks simpler! Thank you for sharing!
ReplyDeleteI haven't used a piping foot before, I imagine it would speed things up if you were doing a lot of piping though!
DeleteWhat a great tutorial, thank you so much! I just cut out a great dress and after seeing this tutorial, I am definitely going to give it a try!
ReplyDeleteThanks a lot for this tutorial! Piping is great, I'm definitely going to have to try it out - I had been wondering about how to put it at a waistline.
ReplyDeleteThanks! I love the idea of piping in self-fabric, I always think of piping in an accent colour, and that makes it too loud for most of what I make. Self-fabric is a great solution.
ReplyDeleteThanks. I'm mad about piping!
ReplyDeleteThanks - I love piping too!!
ReplyDeleteLove it love it love it, Sherry! I do think it's so special--different & pretty & cool, too, and something you NEVER see in stores. Thanks for another wonderful tutorial. I've been using your bound buttonholes lesson quite a bit recently.
ReplyDeleteWhoaa! How about googling "continuous bias strip" (I'm pretty sure about.com has a good tutorial) and making the bias at least a lot zippier? Quilters are very efficient at things they do on a grand scale :-).
ReplyDeleteHey, my waist isn't that big!!
DeleteSeriously though, I have a thing against joins in piping, and try to cut a single strip whenever I can - that method is great if you don't have much fabric leftover!
I like piping, too. It adds a professional detail and interest to most any garment. Piping from plaids and stripes are so interesting.
ReplyDeletePiping certainly does give a nice "finish" to a garment. It's one of those details that you do have to plan for. All too often I think of it when it's already too late!
ReplyDeleteYou're definetely my hero...
ReplyDeletefantastic tutorial, thanks!!!
ReplyDeleteI too love piping details....your dresses and piping all look perfect and beautiful :)
ReplyDeleteGreat post! Thanks for teaching!
ReplyDeleteGreat tute. Thank you so much. It truly is a lovely finish and one I should start incorporating!
ReplyDeleteGreat tutorial. Thank you for sharing.
ReplyDeleteI've added a link to your tutorial on the Sewing Tutorials blog. Hope you're ok with that.
Yes, that's fine Sigrid - thanks!
DeleteThank you su much for sharing this. It's wonderful to take a walk on your gorgeous blog.
ReplyDeleteHave a nice day
Roswitha
This is such a useful tutorial - thankyou very much xXx
ReplyDeleteThank you Sherry, for another great and relevant tutorial. I wanted to ask if the piping cord is a special cord or I can use something I got under hand? For example is it a bit flexible? Streachy? Or will any type of cord do. Thank you, again. I am loving your blog.
ReplyDeleteI love that! What is the size of the teeny piping cord you used?
ReplyDeleteI'm a big fan too. Such an easy way to make things special
ReplyDelete